Ps3 Emulator V1.7 Serial Number

Decompressing Bootloader................................. Speedtouch initialization sequence started.BOOTING THE THOMSON LINUX KERNELStarting the kernel @ 0x801bc018 serial initializedLinux version 2.6.8.1 (debusb@cplx82.edegem.eu.thmulti.com) (gcc version 3.4.2) #1 Mon Nov 12 09:53:50 CET 2007CPU revision is: 00029107bcm63xx : initiazation of mpi bus ...............Determined physical RAM map: memory: 01f7d000 @ 00002000 (usable)On node 0 totalpages: 8063 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 3967 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:1Built 1 zonelistsKernel command line: root=/dev/mtdblock1 rootfstype=squashfsbrcm mips: enabling icache and dcache...Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.Primary data cache 8kB 2-way, linesize 16 bytes.PID hash table entries: 128 (order 7: 1024 bytes)Using 128.000 MHz high precision timer.Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)Memory: 29968k/32244k available (1450k kernel code, 2232k reserved, 258k data, 68k init, 0k highmem)Calibrating delay loop... 251.39 BogoMIPSMount-cache hash table entries: 512 (order: 0, 4096 bytes)Checking for 'wait' instruction... available.NET: Registered protocol family 16usbcore: registered new driver usbfsusbcore: registered new driver hubBluetooth: Core ver 2.6NET: Registered protocol family 31Bluetooth: HCI device and connection manager initializedBluetooth: HCI socket layer initializedsquashfs: version 3.2-r2 (2007/01/15) Phillip Loughersquashfs: LZMA suppport for slax.org by jroJFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.bcm963xx_serial driver v2.0Inotify sysfs create file = 0Inotify sysfs create file = 0Inotify sysfs create file = 0inotify device minor=63Using noop io schedulerThomson BCM963xx flash mapping for BTHubflash: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040number of CFI chips: 1cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.flash mapping initializedCreating 3 MTD partitions on "flash":0x00040000-0x00100000 : "user"0x001b0000-0x00800000 : "rootfs"0x00100010-0x001b0000 : "kernel"mtd: partition "kernel" doesn't start on an erase block boundary -- force read-onlyBluetooth: HCI UART driver ver 2.1Bluetooth: HCI H4 protocol initializedBluetooth: HCI BCSP protocol initializedbrcmboard: brcm_board_init entryERROR - Invalid number of MAC addresses (1007714320) is configured.NET: Registered protocol family 2IP: routing cache hash table of 512 buckets, 4KbytesTCP: Hash tables configured (established 2048 bind 4096)NET: Registered protocol family 1NET: Registered protocol family 17NET: Registered protocol family 15VFS: Mounted root (squashfs filesystem) readonly.Freeing unused kernel memory: 68k freedinit started: BusyBox v1.00 (2007.11.12-09:05+0000) multi-call binaryinit started: BusyBox v1.00 (2007.11.12-09:05+0000) multi-call binaryStarting pid 36, console /dev/ttyS0: '/etc/init.d/rcS'Algorithmics/MIPS FPU Emulator v1.5Using /nmon/nmon.konmon: module license 'unspecified' taints kernel.Button: Character device registered successfully. *** OH G997Init: txIdle set to TRUEpSdramPHY=0xA1FFFFF8, 0x2FE05 0xDEADBEEF[BCM ADSL] Firmware load : 446280 446280 LMEM=(0xFFF00000, 54108) SDRAM=(0xA1FA0000, 392164)AdslCoreHwReset: AdslOemDataAddr = 0xA1FFE458ADSL PHY version is A2pBT009a2.d18b6w_initmpi: device 0x4318 found in PCI slot 1, function 0wl: srom not detected, using main memory mapped srom info (wombo board)IPSecControl Character device registered successfully.NET: Registered protocol family 3NET: Registered protocol family 9NET: Registered protocol family 4NET: Registered protocol family 5NET: Registered protocol family 18NET: Registered protocol family 25SIOCSIFADDR: No such devicekillall: smbd: no process killedkillall: nmbd: no process killedlevel: 24ls: /var/usbmount: No such file or directoryUsing /lib/modules/2.6.8.1/kernel/drivers/usb/host/ohci-hcd.koohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)ohci_hcd: block sizes: ed 64 td 64PCI: Enabling device 0000:00:09.0 (0000 -> 0002)ohci_hcd 0000:00:09.0: OHCI Host ControllerPCI: Setting latency timer of device 0000:00:09.0 to 64ohci_hcd 0000:00:09.0: irq 20, pci mem c0155b00ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 1hub 1-0:1.0: USB hub foundhub 1-0:1.0: 2 ports detectedUsing /lib/modules/2.6.8.1/kernel/drivers/usb/class/usblp.kousblp: falsely claims to have parameter proto_biasusbcore: registered new driver usblpdrivers/usb/class/usblp.c: v0.13: USB Printer Device Class driverStarting print_servermodprobe: module printer.o not found.modprobe: failed to load module printer.ostarting lpdsrvMounting deviceUsing /lib/modules/2.6.8.1/kernel/drivers/scsi/scsi_mod.koSCSI subsystem initializedUsing /lib/modules/2.6.8.1/kernel/drivers/scsi/sd_mod.koUsing /lib/modules/2.6.8.1/kernel/drivers/usb/storage/usb-storage.koInitializing USB Mass Storage driver...usbcore: registered new driver usb-storageUSB Mass Storage support registered.Using /lib/modules/2.6.8.1/kernel/fs/fat/fat.koUsing /lib/modules/2.6.8.1/kernel/fs/vfat/vfat.koUsing /lib/modules/2.6.8.1/kernel/fs/nls/nls_cp437.koUsing /lib/modules/2.6.8.1/kernel/fs/nls/nls_iso8859-1.kousbmgr[280]: start 0.4.8usbmgr[280]: sleep time -1 micro secName: /etc/usbmgr/usbmgr.confLoad_from_file: /etc/usbmgr/preload.confkillall: hciattach: no process killedUsing /lib/modules/krtp.kokrtp ver 2.8 softdsp-vad-multiline-wb (Nov 12 2007 10:10:08)Copyright (C) 2004 Inventel SystemesWritten 2004 by David Libault Written 2004 by Bruce Forgues Written 2004 by Eric Humbert usbmgr[282]: buffer line: remove Tusbmgr[282]: class:0x9 subclass:0x0 protocol:0x0usbmgr[282]: try /etc/usbmgr/class/09/00/00/moduleusbmgr[282]: try /etc/usbmgr/class/09/00/moduleusbmgr[282]: try /etc/usbmgr/class/09/moduleusbmgr[282]: try /etc/usbmgr/class/moduleUsing /lib/modules/bt_reset.kousbmgr[282]: USB device isn't matched the configurationUsing /lib/modules/tty_spi.koConsole is free againMDG on CS0MDG version: 1192-1, expect 1192-1MDG Current Eeprom version : 51, expect 51LOADER: Register timer for first checkLOADER: Register SIGUSR1 - rescueLOADER: Register SIGUSR2 - broadcast alertLOADER: Register SIGHUP - test serial link with handset trough chargerLOADER: Register HCI sniffer for Handset update request notificationsUsing /lib/modules/2.6.8.1/kernel/net/bluetooth/l2cap.koBluetooth: L2CAP ver 2.3Bluetooth: L2CAP socket layer initializedStarting pid 333, console /dev/ttyS0: '/nmon/linux_appl.exe'************* ERROR RECORD *************000000:00:00.000000Application NMON started after POWERON.****************** END *****************appl_init: BUILD VERIFIED with the boardname WL firmwarecode (9-5-B0G0_9-6)WARNING: Unknown Parameter Type ipintf[adsl] trace = 5 0[CWMP] NoIpTimeout must be minimum 120 s.Invalid option => Username :

Ps3 Emulator V1.7 Serial Number

Download Zip: https://www.google.com/url?q=https%3A%2F%2Fmiimms.com%2F2u1xvr&sa=D&sntz=1&usg=AOvVaw1Z3LSkHmaIxV9yodXHM3Ou