Driver Tablet Wolder Mitab Diamond
How to Download and Install Driver Tablet Wolder Mitab Diamond
If you own a Wolder Mitab Diamond tablet and want to connect it to your Windows computer, you will need to install the Wolder USB driver on your PC. The Wolder USB driver allows you to transfer data between your tablet and your computer, as well as flash or install the Wolder stock firmware on your device using the preloader drivers. In this article, we will show you how to download and install the Wolder USB driver for Windows, as well as the Wolder Mitab Diamond firmware ROM.
Download: https://graninypropga.blogspot.com/?el=2w30M4
Download Wolder USB Driver for Windows
The official Wolder USB driver is provided by Wolder Mobile Inc. and supports all Wolder smartphones and tablets. You can download the latest version of the Wolder USB driver from the link below. The file is a zip archive that contains the driver setup file, the driver manual, and the list of supported devices. You will need to extract the zip file on your computer before installing the driver.
Download Wolder Mitab Diamond Firmware ROM
The official Wolder Mitab Diamond firmware ROM is also provided by Wolder Mobile Inc. and can help you reinstall the firmware on your tablet if you have any software issues, such as IMEI error, system boot problem, or general crash problem. You can download the Wolder Mitab Diamond firmware ROM from the link below. The file is also a zip archive that contains the flash file, the flash tool, the USB driver, and the instruction manual. You will need to extract the zip file on your computer before flashing the ROM.
How to Install Wolder USB Driver on Windows
To install the Wolder USB driver on your Windows computer, follow these steps:
Extract the downloaded zip file on your computer and open the extracted folder.
Double-click on the driver setup file (Wolder_Driver_Setup.exe) and follow the on-screen instructions to install the driver.
If you encounter any security warnings, click on "Run" or "Yes" to continue.
Once the installation is complete, restart your computer.
Connect your Wolder Mitab Diamond tablet to your computer using a USB cable. Your computer should recognize your device and install the necessary drivers automatically.
How to Flash Wolder Mitab Diamond Firmware ROM on Windows
To flash the Wolder Mitab Diamond firmware ROM on your Windows computer, follow these steps:
Extract the downloaded zip file on your computer and open the extracted folder.
Install the Wolder USB driver on your computer if you have not done so already.
Backup your data from your tablet as flashing the ROM will erase all your personal data.
Open the flash tool folder (Rockchip_Batch_Tool_v1.8) and double-click on the flash tool executable file (RKBatchTool.exe).
The flash tool will open and show a green square with "Device" written on it. This means that your device is not connected yet.
Turn off your tablet and press and hold the volume up button while connecting it to your computer using a USB cable.
The flash tool will detect your device and show a pink square with "Loader" written on it. This means that your device is in bootloader mode and ready to be flashed.
Click on the "..." button next to "FW Path" and browse to the folder where you extracted the firmware ROM. Select the flash file (Wolder_Mitab_Diamond_4.1_RK.img) and click on "Open".
The flash tool will load the firmware ROM and show a green check mark next to "FW Path".
Click on "Restore" button at the bottom of the flash tool. The flashing process will begin and show a progress bar at the bottom of the flash tool.
Wait for the flashing process to complete. It may take several minutes depending on your device and computer speed.
Once the flashing process is done, you will see a green square with "Finish" written on it. This means that your device has been successfully flashed with the new firmware ROM.
Disconnect your device from your computer and turn it on. It may take some time for your device to boot up for the first time after flashing.
Congratulations! You have successfully downloaded and installed the driver tablet Wolder Mitab Diamond on your Windows computer. You can now enjoy the features and performance of your device.